VM-45

    1. Before
    2. After
  • VM-45

    COMPARE PRODUCT

    Paver machines with hydraulically extendable screed and manual control for grade and slope control.
    Material Laying Capacity : 100 TPH
    Engine Power : 76 hp
    Screed size : 2.5m to 4.5m
    Wheels on rear axle : One on each side

    Option 1: Bituminous material
    Option 2: Bituminous, Wet mix, GSB, DLC, DBM material(Dual Purpose)

PRIME MOVER
  1. Kirloskar make water-cooled electric start Diesel Engine Model 4R 1040T (76 hp @ 2200 rpm) or equivalent
  2. Engine has sufficient space on all the sides for air draft and cooling of engine
  3. Engine is easily accessible for daily maintenance like checking engine oil, coolant water level, engine suction filter etc
  4. Engine starter, alternator can be easily removed for periodic maintenance.
  5. Gauges like engine temperature, oil pressure and ampere meter are on sliding panel and are easily visible from operator’s seat.
POWER DISTRIBUTION GEAR BOX
  1. N/A
HYDRAULICS
  1. All hydraulic pumps, motors and hose pipes are of reputed make.
  2. Utmost care has been taken in selection of joints so as to minimize chances of hydraulic oil leakage.
  3. All ‘0’ rings, grooves are of proper match so that it gives greater life of ‘0’ ring.
SPEED REDUCTION
GEARBOX
  1. Eight speed reduction gearbox to achieve different speed for working and travel.
  2. All the gearbox are in oil bath and are of proper alloy steel material hardened to get greater life.
  3. Gearbox is provided with oil level indicator and oil drain plug for better operation and maintenance.
THICKNESS / LEVEL
CONTROL
  1. Thickness can be controlled manually by simple switch on screed
BRAKES
  1. Brakes can be operated by pushing pedals provided near both the operator’s seat.
  2. The safety brakes are acting on the speed shaft, which are coupled to the drive wheels.
FRONT WHEEL
  1. Two solid rubber tyre of size 550 mm x 175 mm is mounted directly on chassis one on left and one on right side.
  2. Hydraulic steering is fitted for effortless operation.
CONTROL PANEL
  1. Sliding type operator panel with traveling functions on left and right side.
  2. Operating functions on left side.
  3. Double operator seat
  4. Machine is controlled by means of simple switches on operator panel and gear lever near operator seat
  5. Hydraulic steering is fitted for effortless operation.
REAR BOGIE
  1. Two Nos. tyre size 11.00 x 20, one on either side is mounted directly on chassis.
HOPPER
  1. Movement of the two hoppers is obtained by means of hydraulic cylinder operated independently by simple switches of control panel.
  2. Hopper Capacity: 4.25 CM
CONVEYOR SYSTEM
  1. Two pallet conveyors with hardened steel chain provide the material to two sets of augers which spreads material on both sides.
  2. Mechanical drive for conveyor and auger
  3. Each of the pallet conveyors can be controlled independently from the operator’s seat.
WORM ASSEMBLY
  1. Worm spreads material in front of screed in total width of pavement.
  2. Mechanical drive for conveyor and auger
  3. Properly sealed bearings are used for greater life as they are always covered with the laying material while paving.
  4. Special arrangement for greasing is provided as greasing is required daily for greater life of bearing.
  5. Worm is of Ni-Hard / Hi Chromium steel material, properly heat treated for greater service life.
  6. Proper covers for chain are provided for greater service life of chain.
SCREED
  1. Basic screed width of 2.5 meter, hydraulically extendable up to 4.5 meter.
  2. Main screed is pivoted at the center point of the machine to assure a constant flatness or work on uneven grounds.
  3. Lateral mobile plates are hydraulically operated, sliding on chromium plated telescopic cylindrical guides for wear resistance to archive paving width up to extendable limit.
  4. Screed heating by 8 LPG burners two on each mobile plate and four nos. on main screed plate.
  5. Vibration is provided on screed with fixed frequency.
SHUTTERS AND
HYDRAULIC PIPING
  1. Shutters are provided on two side of machine which can easily be opened for easy inspection and maintenance of the machine.
  2. Special care has been taken to keep maintenance parts on left side of machine so that maintenance on road can be safe.
  3. Filters are kept on outer side of machine for maintenance.
  4. Maximum use of MS pipe is done as MS pipes occupy less space; they can be easily clamped and reduces chances of leakage.
THRUST ROLLER
  1. Two thrust rollers are fixed on heavy oscillating beam provided on front part of the machine.
POWER UNIT
Engine
  • Kirloskar make water-cooled electric start diesel engine, Model 4R 1040T, 76 hp (57 kW) @ 2200 rpm or equivalent
Electrical System
  • 12 V DC
Emission Standard
  • BS-III
Eight Speed Reduction Gearbox
  • Eight speed reduction gearbox
PERFORMANCE
Laying suitability
  • Option 1: Bituminous material
  • Option 2: Bituminous, Wet mix, GSB, DLC,DBM material
Laying Capacity
  • 100 TPH
Laying Thickness
  • 200 mm (Max) to 10 mm (Min)
  • 8″  (Max) to 3⁄8″ (Min)
Transmission
  • Hydrostatic (option : Mechanical)
Working Speed
  • 1.27 to 24 m/min (Max.)
Travelling Speed
  • 16 km/hr (Max)
Weight
  • 9,400 kg  (20,780  lb) approx.
Slope & Grade Control
  • Manual
Maintenance Shutters
  • On two side of machine
Conveyor & Pump Motor
  • Sauer Danfoss, Germany or equivalent
SCREED
Screed width
  • 2.5 m (8′ 2½”) basic width
  • Hydraulically extendable upto 4.5 m (14′ 9⅛”)
Crown (Manual)
  • -1° / +4°
Screed Heating
  • Yes, with 8 LPG burner facility
Screed Vibration
  • Yes (Fix Speed)
UNDER CARRIAGE
Rear Wheel
  • Two no. Pneumatic Tyre
  • Size: 11.00 x 20
Front Wheel
  • Two no. Solid Rubber Tyre
  • 550 Dia. x 175 mm wide
REFILL CAPACITIES
Fuel
  • 76 L (16.8 gal)
Hydraulic Oil
  • 120 L (26.5 gal)
Cooling System
  • 6.5 L (1.4 gal)
Engine Oil
  • 11 L (2.4 gal)
OPERATOR STATION
Control Panel Type
  • Sliding
Operator Seat
  • Double Operator Seat
Travelling Function
  • Left & Right side
Operating Function
  • Left side
Steering
  • Hydraulic
Brake
  • Caliper disc brake on both the sides
CONVEYOR & AUGER SYSTEM
Conveyor & Auger
  • 2 Sets, one on each side
Conveyor Drive
  • Mechanical
Conveyor Control
  • Lever provided on left side
Auger Screw Size
  • Dia 250 mm (10″)
Auger Material
  • Ni-Hard / High Chromium Steel Material
HOPPER & FEEDING SYSTEM
Hopper Operation
  • Hydraulic
Hopper Capacity
  • 4.25 m3  (151 ft3)
Hopper Width
  • Working: 3.22 m (10′ 6¾”)
  • Closed: 2.44 m (8′)
Feed Tunnel Width
  • 1.276 m (4′ 2¼” )
DIMENSIONS
Operating Height
  • 3.56 m (11′ 81⁄8″)
Shipping Height (canopy tilted)
  • 2.70 m (8′ 105⁄16″)
(w/o canopy & exhaust)
  • 2.62 m (8′ 7¼”)
Shipping Width
  • 2.69 m (8′ 10″)
Length (Tractor unit + screed)
  • 5.53 m (18′ 1¾”)
Wheel Base
  • 2.62 m (8′ 7¼”)
Dump Height
  • 0.70 m (2′ 3½”)
Thrust Roller Height
  • 0.57 m (1′ 10½”)
MACHINERY ACCESSORIES

Canvas Canopy; Working & Traveling Lights; Tool Kit with Jack; Horn

OTHER FEATURES

Single Level control for speed gearing is provided which prevent dual engagement and breaking of gears; All operating levers including panel switch board are handy and within easy reach; All gears and shafts of gear box are made from alloy steel and are hardened and ground for efficient working; Screed is vibrated with hydraulic motor to compact laid layer; All jacks are having same kind of seal kit (Piston seal and rod seal of PU material).

Downloads
  1. Download VM-45 Brochure
  2. UNITER General Product Literature
Note: Specification / description / dimensions are indicative and subject to change without notice due to modification alteration or custom engineering. Maximum performances cannot be obtained simultaneously.